56n
Seat, mirror and steering wheel position memory
*
Heated seats
*
You can have your car
programmed so that when it is
unlocked with your own personal
remote control your preferred seat,
mirror and steering wheel positions are
obtained automatically.
<
If this Key Memory is used, make
sure before unlocking that the
footwell behind the driver's seat is
unobstructed. Otherwise persons could
be injured or damage caused if the seat
moves back automatically to the previ-
ously selected position.
<
Passenger's side mirror tilt-down
(parking position)
1. Move the mirror changeover switch
(arrow) to the "driver's mirror" posi-
tion
2. When reverse gear (or automatic
transmission selector lever position
R) is selected, the passenger's side
mirror tilts down slightly. The road
surface close to the car (for instance
the kerb) is then in the driver's field of
view, for instance while parking the
car.
This automatic function can be
switched off if not required: move the
mirror changeover switch to the
"passenger's side" mirror position.
390de720
The seat cushion and seat back can
be heated when the ignition key is in
position 2. By pressing the button
several times in succession, you can
obtain different heat outputs.
Direct switching off is also possible
when a higher heat output has been
selected:
Keep the button pressed in for a longer
period.
To Next Page
Loading...
