73n
OverviewControlsMaintenanceMinor repairsDataKeywords
Wipers
0 Parked position of wipers
1 Intermittent operation or rain sensor
*
2 Normal wiper speed
3 Fast wiper speed
4 Flick wipe
5 Windscreen washer
6 Intensive cleaning
*
7 Knurled wheel for controlling the
intermittent wipe intervals and the
sensitivity of the rain sensor
394de730
Intermittent operation or
rain sensor
*
Intermittent operation:
Using knurled wheel 7 you can select
four intermittent wipe intervals.
The wipe speed is also varied automati-
cally, according to road speed.
Rain sensor:
The rain sensor is mounted on the
windscreen, directly ahead of the inside
mirror.
Activating the rain sensor:
From ignition key position 1, move the
lever to setting 1. In any event, the
wipers will now cross the windscreen
once.
You can leave the lever in setting 1 all
the time, then all you need to do is to
activate the rain sensor from ignition
key position 1.
Turn knurled wheel 7 briefly.
To vary the sensitivity of the rain
sensor:
Turn knurled wheel 7.
Deactivating the rain sensor:
Move lever to position 0.
Deactivate the rain sensor in an
automatic car wash, otherwise the
car's wipers may operate and be
damaged.
<
Normal wiper speed
The wipers change over automatically
to the intermittent wipe mode when the
car comes to a standstill (not on cars
with rain sensor).
Fast wiper speed
The wipers switch to normal speed
when the car comes to a standstill (not
on cars with rain sensor).
Windscreen washer
Fluid from the washer tank is sprayed
on to the windscreen and the wipers
are operated for a short time.
Intensive cleaning
*
Same as 5, but intensive cleaning fluid
is first sprayed on to the windscreen.
Changing the wiper blades: see
page 160.
ba.book Page 73 Tuesday, December 17, 2002 4:26 PM
To Next Page
Loading...
