BMW 520D - Page 92

92n
Computer in MID
*
Speed
You can obtain a display of the car's
average speed.
To start the calculation, select the func-
tion with the engine running.
Press the right of the key.
Press:
The display shows the average speed.
To recalculate the speed:
Press the right of the key.
Extended immobiliser function
You can enter a code which has to be
input on future occasions before the
engine can be started.
If the code is not available or has been
forgotten, emergency deactivation is
possible; see next page.
Selecting and activating code:
Press the right of the key.
Press the left of the key.
Display shows:
Enter the code at the function keys.
To correct an input:
Press the left of the key and repeat the
input.
To store the input:
Press the right of the key.
Turn the ignition key back to 0.
Deactivating the code:
When you are asked to input the code
(ignition key in position 1 or 2):
>
Input the code at the function keys.
Press the right of the key.
After the code has been input correctly
and confirmed with the SET key, the
time display appears.
ba.book Page 92 Tuesday, December 17, 2002 4:26 PM