EasyManua.ls Logo

BMW 540i - Page 151

BMW 540i
402 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Have the system immediately checked by a deal‐
er's service center or another qualified service
center or repair shop.
Additional information:
DSC Dynamic Stability Control, refer to
page 209.
DSC Dynamic Stability Control is
deactivated or DTC Dynamic
Traction Control is activated
DSC is deactivated or DTC is activated.
Additional information:
DSC Dynamic Stability Control, refer to
page 209.
DTC Dynamic Traction Control, refer to
page 211.
Flat Tire Monitor FTM
The FTM signals a loss of tire inflation
pressure in a tire.
Reduce your speed and stop cautiously.
Avoid sudden braking and steering maneuvers.
Additional information:
Run-flat tires, refer to page 344.
Tire pressure monitor
The indicator light illuminates: the Tire
Pressure Monitor reports a low tire infla‐
tion pressure or a flat tire. Follow the in‐
formation in the Check Control message.
The indicator light flashes and is then illuminated
continuously: flat tires or tire pressure losses
cannot be detected.
Interference caused by systems or devices
with the same radio frequency: after leaving
the area of the interference, the system auto‐
matically becomes active again.
In the case of tires with special approval: the
tire pressure monitor was unable to complete
the reset. Reset the system again.
A wheel without wheel electronics is
mounted: have it checked by a dealer’s serv‐
ice center or another qualified service center
or repair shop as needed.
Malfunction: have the system checked by a
dealer’s service center or another qualified
service center or repair shop.
Additional information:
Tire pressure monitor, refer to page 337.
Steering system
Steering system may not be working.
Have the system checked by a dealer's
service center or another qualified serv‐
ice center or repair shop.
Emissions
The warning light lights up:
Emissions are deteriorating. Have the
vehicle checked as soon as possible.
The warning light flashes under certain cir‐
cumstances:
This indicates that there is excessive misfiring
in the engine.
Reduce the vehicle speed and have the sys‐
tem checked immediately; otherwise, serious
engine misfiring within a brief period can seri‐
ously damage emission control components,
in particular the catalytic converter.
Additional information:
Socket for Onboard Diagnosis, refer to
page 363.
Seite 151
Displays
CONTROLS
151
Online Edition for Part no. 01405A11338 - VI/20

Related product manuals