Needle in range of arrow 2: the drive power in
percent, POWER.
Reduced drive power
The available power may be reduced due to
certain factors. The power gauge is automati-
cally adjusted accordingly.
In addition, the icons on the power gauge and
tachometer indicate reduced drive power.
Icon Description
Blue icon: cold drivetrain.
White icon: increased drive sys-
tem temperature, for instance
due to sustained or high
power demand when driving
on mountain roads.
Depending on vehicle equip-
ment and national-market ver-
sion:
Drive power limitation defined
via the BMW Digital Key.
System-related functional limi-
tation.
A Check Control message is
displayed in addition where ap-
plicable.
Tachometer
General information
Always avoid RPM in the red warning field. In
this range, the fuel supply is reduced to protect
the engine.
Activating/deactivating the
tachometer
The tachometer is displayed depending on the
selected drive mode or the individually config-
ured layout.
The tachometer display changes depending
on the selected driving mode.
Reduced engine speed range
The available engine speed range may be re-
duced due certain factors such as a cold drive
system. The tachometer display is automati-
cally adjusted depending on the available en-
gine speed range.
Standby state and drive-
ready state
OFF is displayed in the instru-
ment cluster. Drive-ready state
is turned off and standby state
turned on.
READY is displayed in the
instrument cluster. The Auto
Start/Stop function is ready for
automatic engine start.
Additional information:
▷
Operating condition of the vehicle, refer to
page 41.
▷ Auto Start/Stop function, refer to page 123.
Engine temperature
▷
Cold engine: the needle
is in the blue temperature
range, close to the stop of
the temperature display, and
the word WARM-UP is dis-
played.
Seite 150
CONTROLS
Displays
150
Online Edition for Part no. 01405A8A5A2 - VI/23
To Next Page
Loading...
Need help?
General
