Everything under control
80
Memorising actual speed as limit value
Select and press the controller.
The actual speed is memorised as the limit
value.
Activating/deactivating the speed limit
Select "ON / OFF" and press the controller.
When the speed limit is active, then "ON / OFF"
is marked.
Limit on the info display
If for example the advance warning field of the
revolution counter is active, see page 72, the
speed limit is indicated in the speedometer by
means of a warning field, see arrow.
Stopwatch
Starting and stopping
iDrive, principle, see page 14.
1. Press the button to call up the start
menu.
2. Move the controller towards "On-board
data".
3. Select and press the controller.
4. Select and press the controller. The stop-
watch is reset to 0 and started.
5. Select and press the controller. Time-
keeping is stopped.
Press the controller anew to reset the stop-
watch to 0.
You can also call up other functions at any
time while the stopwatch is running. The
stopwatch continues to run in the back-
ground.<
Taking an interim time reading
Select "INTERM. TIME" and press the control-
ler. The intermediate reading is displayed below
the current time display.
Assistance window* for
on-board data
You can have the following computer functions
displayed in the assistance window:
> Computer
> Journey computer
> Speed limit
> Stopwatch
Online Edition for Part no. 01 41 0 013 197 - © 02/07 BMW AG
To Next Page
Loading...
Need help?
General
