Need help?Do you have a question about the BMW G 450 X and is the answer not in the manual?
General| Displacement | 449 cc |
|---|---|
| Bore x Stroke | 98 mm x 59.6 mm |
| Compression Ratio | 12.0:1 |
| Fuel System | Electronic fuel injection |
| Cooling System | Liquid cooled |
| Ignition | Digital CDI |
| Transmission | 5-speed |
| Final Drive | Chain |
| Frame | Steel perimeter frame |
| Front Tire | 90/90-21 |
| Rear Tire | 140/80-18 |
| Fuel Capacity | 7.5 L (2.0 US gal) |
| Engine Type | Single cylinder, 4-stroke |
| Front Suspension | Telescopic fork |
| Front Brake | Single disc |
| Rear Brake | Single disc |
Provides an initial overview of the motorcycle's features and manual structure.
Explains abbreviations and symbols used in the manual for clarity.
Specifies the intended use and limitations of the motorcycle for safe operation.
Details the technical specifications and measurements of the motorcycle.
Discusses potential differences between manual specs and the actual motorcycle.
Provides a detailed view of the motorcycle's left side components.
Provides a detailed view of the motorcycle's right side components.
Details the components and controls on the left handlebar.
Details the components and controls on the right handlebar.
Describes the motorcycle's instrument panel and its functions.
Explains the various status indicators on the instrument panel.
Details warning lights and their meanings.
Instructions for starting the engine and locking the steering.
Explanation of the instrument panel functions and operation.
Information on operating the headlights and turn signals.
How to operate the turn indicators.
Instructions for adjusting the motorcycle mirrors.
Information on adjusting the handlebars for reach and tilt.
How to adjust the spring preload for the suspension.
Details on adjusting the damping characteristics of the suspension.
Information regarding the headlight beam throw adjustment.
Instructions for removing and installing the motorcycle seat.
Information on engine speed limits and potential damage from over-revving.
Essential safety guidelines for riders, including equipment and speed.
Pre-ride checklist for important functions, settings, and wear limits.
Step-by-step guide for starting the motorcycle's engine.
Guidelines for the initial break-in period of the motorcycle.
Specific advice for riding the motorcycle off-road, including tire pressure.
Information on how to increase engine power using a coded plug.
Details on changing the final-drive gear ratio and its implications.
How to minimize stopping distance and brake care.
Instructions for parking the motorcycle safely, especially on its side stand.
Guidance on refueling, including fuel type and safety precautions.
Steps to properly secure the motorcycle for transport.
Procedures for checking and replacing wear parts and torques.
Tasks for running-in checks and periodic services.
Specific maintenance requirements for off-road riding conditions.
Lists the tools provided with the motorcycle for basic maintenance.
How to check and top up engine oil.
Importance of brake system dependability and checks.
How to check front and rear brake pad thickness.
Checking brake fluid levels in front and rear brakes.
Checking and topping up the coolant level.
Procedures for checking clutch operation and lever play.
How to check tyre tread depth and pressures.
Instructions for checking motorcycle rims for defects.
Lubricating and checking the drive chain.
Cleaning the slider tubes of the telescopic forks.
Cleaning the motorcycle's spring strut.
General instructions and procedure for replacing bulbs.
Procedures for replacing main and secondary fuses.
Maintenance instructions and recharging procedures for the battery.
Procedure for replacing the instrument panel battery.
Recommendations for cleaning and care products.
Step-by-step guide to washing the motorcycle.
Procedures for cleaning delicate parts like plastics.
Instructions for preparing the motorcycle for storage.
Steps to take when bringing the motorcycle back into use.
Specifications for various threaded fasteners, including torque values.
Detailed technical specifications for the motorcycle's engine.
Technical data related to fuel, capacity, and grade.
Technical specifications for engine oil, including capacity and viscosity.
Technical details of the motorcycle's clutch system.
Technical specifications for the gearbox and transmission ratios.
Technical data concerning the rear-wheel drive system.
Technical specifications for the front and rear suspension systems.
Technical data for the front and rear brake systems.
Technical data for wheels and tyres, including sizes and designations.
Technical specifications related to the motorcycle's electrical system.
Technical details about the motorcycle's frame construction.
Key dimensions of the motorcycle.
Technical data on unladen weight, gross weight, and payload.
Performance specifications like top speed.
Information on advanced maintenance and repair services.
BMW's commitment to service quality and reliability.
Details on the service card for breakdown assistance.
Information about the global network of authorized dealers.
Overview of tasks performed during pre-delivery, running-in, and regular services.
Forms for recording completed maintenance services.
A table for recording service history and special campaigns.
To Next Page
