To Next Page

To Previous Page

Adjusting spring preload

for rear wheel

Make sure the ground is level

and firm and place the motor-

cycle on its stand.

Use adjusting rings 1 and 2 to

adjust spring preload.

Release the lock by turning

adjusting ring 1 in direction b

with the tool from the toolkit.

To turn the adjusting rings, en-

gage tools 3 in such a way that

hook a or hook b securely en-

gages a groove.

The adjusting rings can be

turned in either direction

without turning the tool over:

simply engage the appropriate

hook in a groove.

If you want to increase spring

preload, turn adjusting ring 2 in

direction a.

If you want to reduce spring

preload, turn adjusting ring 2 in

direction b.

Tighten the lock by turning ad-

justing ring 1 in direction a with

the tool from the toolkit.

Operation

Other manuals for BMW G 450 X

Questions and Answers:

Need help?

Do you have a question about the BMW G 450 X and is the answer not in the manual?

General