Lubrication and maintenance chart
Jobs to be performed
The numerals correspond with the lubrication
point indications and the illustrations of the
lubrication chart on the margin.
1. Pedal shaft - Lubricating grease
2. Universal joint, steering - Lubricating
grease
3. Steering arm shaft — Lubricating
grease
4. Steering knuckle assemblies, right and
left 3 nipples at each side - Lubricating
grease
5. Wheel bearings, right and left
- Lubricating grease
6. Front suspension, swing arm pivot
bearings, right and left -engine oil SAE 40
7. Brake master cylinder - ATE brake
fluid blue
8. Battery - Distilled water
9. Contact breaker - High-temperature
bearing grease
10. Engine - HD engine oil
11. Rear suspension leaf springs - spray oil
12. Rear drive - Engine oil SAE 40
13. Air-cleaner -
14. Transmission - Engine oil SAE 40
Symbols used for lubricants and
maintenance products
♦ Engine HD oils - summer SAE40, winter
SAE 20 or 20 W/40, at very strong frosts
10W/30
• Transmission, rear drive and front
suspension swing arm pivot bearings
(O level check) engine oil SAE 40
(Premium or HD oils for Otto cycle
engines)
▲ Lubricating grease 355° F, melting point
■ Distilled water
+ Brake fluid -ATE blue
◊ Spray oil
x High-temperature bearing grease
31
To Next Page
Loading...