BMW M2 - Page 132

Speed warning
Concept
A speed limit can be set that when reached will
cause a warning to be issued.
General information
The warning is repeated if the vehicle speed ex‐
ceeds the set speed limit again, after it has drop‐
ped below it by 3 mph/5 km/h.
Adjusting
Via iDrive:
1.
"My Vehicle"
2. "Vehicle settings"
3. "Speed warning"
4. "Warning at:"
5. Turn the Controller until the desired speed is
displayed.
6. Press the Controller.
Activating/deactivating
Via iDrive:
1.
"My Vehicle"
2. "Vehicle settings"
3. "Speed warning"
4. "Speed warning"
Setting your current speed as
the speed warning
Via iDrive:
1.
"My Vehicle"
2. "Vehicle settings"
3. "Speed warning"
4. "Select current speed"
Vehicle status
General information
The status can be displayed and actions per‐
formed for several systems.
Opening the vehicle status
Via iDrive:
1. "My Vehicle"
2. "Vehicle status"
Information at a glance
Symbols Description
"Flat Tire Monitor": Status of the
Flat Tire Monitor, refer to
page 145.
"Tire Pressure Monitor": Status
of the Tire Pressure Monitor, re‐
fer to page 141.
"Engine oil level": Electronic en‐
gine oil level check, refer to
page 232.
"Check Control": displaying
stored Check Control mes‐
sages, refer to page 122.
"Service required": displaying
service requirements, refer to
page 126.
"Teleservice Call": Service Re‐
quest.
Seite 132
CONTROLS
Displays
132
Online Edition for Part no. 01402720665 - II/19