approaching slowly are indicated by signal tones
and a display on the Control Display.
General information
The ultrasound sensors for measuring the dis‐
tances are located in the bumpers.
The range, depending on obstacles and environ‐
mental conditions, is approx. 6 ft/2 m.
An acoustic warning is first given in the following
situations:
▷ By the front sensors and the two rear corner
sensors at approx. 24 in/60 cm from the ob‐
ject.
▷ By the rear middle sensors at a distance to
the object of approx. 5 ft/1.50 m.
▷ When a collision is imminent.
Safety information
Warning
The system cannot serve as a substitute for the
driver’s personal judgment in assessing the
traffic conditions. Based on the limits of the
system, it cannot independently react to all traf‐
fic situations. There is a risk of accident. Adjust
driving style to traffic conditions. Watch traffic
closely and actively intervene where appropri‐
ate.
Warning
Due to high speeds when PDC Park Distance
Control is activated, the warning can be de‐
layed due to physical circumstances. There is a
risk of injury or risk of damage to property.
Avoid approaching an object too fast. Avoid
driving off fast while PDC Park Distance Control
is not yet active.
Overview
With front PDC: button in vehicle
Park assistance button
Ultrasound sensors
Ultrasound sensors of the PDC,
for instance in the bumpers.
Functional requirements
Ensure full functionality:
▷ Do not cover sensors, for instance with stick‐
ers, bicycle racks.
▷ Keep the sensors clean and unobstructed.
Switching on/off
Switching on automatically
With the engine running, engage the selector
lever in position R.
Automatic deactivation during
forward travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
Seite 166
CONTROLS
Driving comfort
166
Online Edition for Part no. 01402720665 - II/19
To Next Page
Loading...
