BMW M2 - Page 178

▷ Upper body region.
▷ Upper body region and floor area.
▷ Floor area.
▷ Windows and floor area: driver's side only.
▷ Windows, upper body region and floor area:
driver's side only.
If the windows are fogged over, press the AUTO
button to utilize the condensation sensor.
To defrost windows and remove
condensation
Concept
Ice and condensation are quickly removed from
the windshield and the front side windows.
Switching on/off
Press the button.
The LED is illuminated with the system
switched on.
The air flow can be adjusted with the program
active.
If the windows are fogged over, you can also
switch on the air conditioning or press the AUTO
button to utilize the condensation sensor.
Rear window defroster
Press the button. The LED lights up.
The rear window defroster switches off
automatically after a certain period of time.
Microfilter/activated-charcoal filter
In external and recirculated-air mode, the micro‐
filter/activated charcoal filter filters dust, pollen,
and gaseous pollutants out of the air.
Have this filter changed during vehicle mainte‐
nance, refer to page 238.
Ventilation
Front ventilation
▷ Lever for changing the air flow direction, ar‐
row 1.
▷ Thumbwheels for opening and closing the
vents continuously, arrows 2.
▷ Thumbwheel to vary the ventilation tempera‐
ture in the upper body region, arrow 3.
Toward blue: colder.
Toward red: warmer.
This does not change the set interior temper‐
ature for the driver and front passenger.
Adjusting
▷ Ventilation for cooling:
Adjust the vent so that the air is directed to‐
wards you, for instance when the vehicle is
too hot.
▷ Draft-free ventilation:
Adjust the vent to let the air flow past you.
Seite 178
CONTROLS
Climate control
178
Online Edition for Part no. 01402720665 - II/19