BMW M2 - Page 222

Filling
1. Shake the sealant container.
2. Pull the connection hose fully out of the com‐
pressor housing. Do not kink the hose.
3. Screw the connection hose onto the connec‐
tor of the sealant container.
4. Insert the sealant container on the compres‐
sor housing in an upright position.
5. Remove the valve cap from the tire valve and
screw the filling hose of the sealant container
onto the tire valve of the nonworking wheel.
6. With the compressor switched off, insert the
plug into the power socket inside the vehicle.
Seite 222
MOBILITY
Wheels and tires
222
Online Edition for Part no. 01402720665 - II/19