5. The coolant level is correct if it lies between
the minimum and maximum marks in the filler
neck.
6. Close the lid.
Adding
1.
Let the engine cool.
2. Open the hood.
3. Turn the lid of the coolant reservoir slightly
counterclockwise to allow any excess pres‐
sure to dissipate, then open it.
4. If the coolant is low, slowly add coolant up to
the specified level; do not overfill.
5. Close the lid.
6. Have the cause of the coolant loss eliminated
as soon as possible.
Disposal
Comply with the relevant environmental
protection regulations when disposing of
coolant and coolant additives.
Seite 237
Coolant
MOBILITY
237
Online Edition for Part no. 01402720665 - II/19
To Next Page
Loading...
