BMW M2 - Page 82

Power windows
Safety information
Warning
When operating the windows, body parts and
objects can be jammed. There is a risk of injury
or risk of damage to property. Make sure that
the area of movement of the windows is clear
during opening and closing.
Overview
Power windows
Opening
▷
Press the switch to the resistance point.
The window opens while the switch is being
held.
▷
Press the switch beyond the resistance
point.
The window opens automatically. Pressing
the switch again stops the motion.
For convenient opening via the remote control,
refer to page 69.
Closing
▷
Pull the switch to the resistance point.
The window closes while the switch is being
held.
▷
Pull the switch beyond the resistance
point.
The window closes automatically if the door
is closed. Pulling again stops the motion.
Closing via Comfort Access, refer to page 74.
Jam protection system
Concept
The jam protection prevents objects or body
parts becoming jammed between the door frame
and window while a window is being closed.
General information
If resistance or a blockage is detected while a
window is being closed, the closing action is in‐
terrupted and the window opens slightly.
Safety information
Warning
Accessories on the windows such as antennas
can impact jam protection. There is a risk of in‐
jury. Do not install accessories in the area of
movement of the windows.
Closing without the jam protection
system
In case of danger from the outside or if ice might
prevent normal closing, proceed as follows:
1. Pull the switch past the resistance point
and hold it there.
The window closes with limited jam protec‐
tion. If the closing force exceeds a specific
threshold, closing is interrupted.
Seite 82
CONTROLS
Opening and closing
82
Online Edition for Part no. 01402720665 - II/19