Compressor
1 On/off reel
2 Holder for bottle
3 Reduce inflation pressure
4 Inflation pressure dial
5 Compressor
6 Connector/cable for socket
7 Connection hose — stowed in the bottom
of the compressor
Filling the tire with sealant
1.
Shake the sealant container.
2. Take the connection hose completely out of
the compressor housing. Do not kink the
hose.
3. Attach the connection hose to the connec‐
tor of the sealant container, ensuring that it
engages audibly.
4. Slide the sealant container upright into the
holder on the compressor housing, ensur‐
ing that it engages audibly.
Seite 186
MOBILITY
Wheels and tires
186
Online Edition for Part no. 01 40 2 961 140 - II/15
To Next Page
Loading...
