rectly, for instance radio stations, navigation des‐
tinations, phone numbers and menu entries.
Settings are stored for the driver profile currently
used.
Storing a function
1. Select function via iDrive.
2.
Press and hold the desired button
until a signal sounds.
Executing a function
Press the button.
The function will work immediately. This means,
for instance that the number is dialed when a
phone number is selected.
Displaying the key assignment
Touch buttons with finger. Do not wear gloves or
use objects.
The assignment of the buttons is displayed in
the upper area of the Control Display.
Deleting the button assignments
1.
Press buttons 1 and 8 simultaneously for ap‐
prox. 5 seconds.
2. "OK"
Seite 41
iDrive
AT A GLANCE
41
Online Edition for Part no. 01405A2CF16 - II/21
To Next Page
Loading...
