Rear wiper
Switching on the rear wiper
Turn the outer switch upward.
▷ Resting position of the wiper, position 0.
▷ Intermittent mode, arrow 1. When reverse
gear is engaged, the system switches to con‐
tinuous operation.
Clean the rear window
Turn the outer switch in the desired direction.
▷ In resting position: turn the switch downward,
arrow 3. The switch automatically returns to
its idle position when released.
▷ In intermittent mode: turn the switch further,
arrow 2. The switch automatically returns to
its interval position when released.
The function is deactivated if the washer fluid
reservoir level is low.
Fold-away position of the wipers
Principle
In the fold-out position, the wipers can be folded
out from the windshield, which is important, for
instance, when changing the wiper blades or for
folding away under frosty conditions.
Safety information
Warning
If the wipers start moving in the folded away
state, body parts can be jammed or damage
may occur to parts of the vehicle. There is a risk
of injury or risk of damage to property. Make
sure that the vehicle is switched off when the
wipers are in the folded away state and the wip‐
ers are folded in when switching on.
NOTICE
If the wipers are frozen to the windshield, the
wiper blades can be torn off and the wiper mo‐
tor can overheat when switching on. There is a
risk of damage to property, among other poten‐
tial damage. Defrost the windshield prior to
switching the wipers on.
Seite 142
CONTROLS
Driving
142
Online Edition for Part no. 01405A37822 - VI/21
To Next Page
Loading...
