The basic setting can be adjusted manually.
Via iDrive:
1. "My Vehicle"
2. "iDrive settings"
3. "Displays"
4. "Head-Up Display"
5. "Brightness"
6. Turn the Controller until the desired bright‐
ness is set.
7. Press the Controller.
When the low beams are switched on, the
brightness of the Head-up Display can be addi‐
tionally influenced using the instrument lighting.
Adjusting the height
Via iDrive:
1.
"My Vehicle"
2. "iDrive settings"
3. "Displays"
4. "Head-Up Display"
5. "Height"
6. Turn the Controller until the desired height is
reached.
7. Press the Controller.
The setting is stored for the driver profile cur‐
rently used.
The height of the Head-up Display can also be
stored using the memory function, refer to
page 105.
Setting the rotation
The Head-up Display view can be rotated.
Via iDrive:
1.
"My Vehicle"
2. "iDrive settings"
3. "Displays"
4. "Head-Up Display"
5. "Rotation"
6. Turn the Controller until the desired setting is
selected.
7. Press the Controller.
Visibility of the display
The visibility of the displays in the Head-up Dis‐
play is influenced by the following factors:
▷ Seat position.
▷ Objects on the cover of the Head-up Display.
▷ Sunglasses with certain polarization filters.
▷ Wet roads.
▷ Unfavorable light conditions.
If the image is distorted, have the basic settings
checked by a dealer’s service center or another
qualified service center or repair shop.
Special windshield
The windshield is part of the system.
The shape of the windshield makes it possible to
display a precise image.
A film in the windshield prevents double images
from being generated.
For this reason, it is strongly suggested to have
the special windshield replaced by a dealer’s
service center or another qualified service center
or repair shop, if necessary.
Seite 150
CONTROLS
Displays
150
Online Edition for Part no. 01405A1F693 - X/20
To Next Page
Loading...
