BMW X3 - Page 211

Overview
Depending on the vehicle
equipment: button in the vehicle
Park assistance button
Camera
The camera lens is located in the handle of the
tailgate.
The image quality may be impaired by dirt. If
necessary, clean the camera lens.
Switching on/off
Switching on automatically
The system is switched on automatically if selec‐
tor lever position R is engaged when the engine
is running.
Automatic deactivation during
forward travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
Depending on the vehicle
equipment: switching on/off
manually
Press the park assistance button.
▷ On: the LED lights up.
▷ Off: the LED goes out.
The parking assistance functions are shown on
the Control Display.
Switching the view via iDrive
If the rearview camera view is not displayed,
change the view via iDrive:
1.
Move the Controller to the left, if needed.
2. "Rear view camera"
The rearview camera image is displayed.
Functional requirements
▷ The tailgate is fully closed.
▷ Keep the recording range of the camera
open. Protruding cargo, roof rack systems or
trailers can limit the detection range of the
camera.
Display on the Control Display
General information
The assistance functions can be manually acti‐
vated.
Via iDrive:
▷ "Parking aid lines".
Pathway lines and turning radius lines are dis‐
played, refer to page 212.
▷ "Obstacle marking".
Depending on the vehicle equipment, the ob‐
stacles detected by PDC Park Distance Con‐
trol are displayed, refer to page 212, by
markings.
▷ "Trailer hitch - zoom".
Seite 211
Driver assistance systems
CONTROLS
211
Online Edition for Part no. 01405A1F693 - X/20