BMW X3 - Page 325

5. The coolant level is correct if it lies between
the minimum and maximum marks in the filler
neck.
6. Close the lid.
Adding coolant
1.
Let the engine cool.
2. Open the hood, refer to page 318.
3. Turn the lid of the coolant reservoir slightly
counterclockwise to allow any excess pres‐
sure to dissipate, then open it.
4. Open the coolant reservoir lid.
5. If the coolant is low, slowly add coolant up to
the specified level; do not overfill.
6. Close the lid.
7. Have the cause of the coolant loss eliminated
as soon as possible.
Disposal
Comply with the relevant environmental
protection regulations when disposing of
coolant and coolant additives.
Seite 325
Coolant
MOBILITY
325
Online Edition for Part no. 01405A1F693 - X/20