BMW X3 - Page 69

Displaying the version of the
installed software
The software version installed in the vehicle is
displayed.
Via iDrive:
1. "My Vehicle"
2. "iDrive settings"
3. "Software update"
4. "Show current version"
If an update has been carried out before, select
the desired version to display additional informa‐
tion.
Updating software via USB
The software may only be updated when the ve‐
hicle is stationary.
Via iDrive:
1.
Store the file for the software update in the
main folder of a USB device.
2. Connect the USB device at the USB port.
3. "My Vehicle"
4. "iDrive settings"
5. "Software update"
6. "Update software"
7. "USB"
8. "Install software"
9. "OK"
10.Wait for the update to complete.
11."Shut down system"
If necessary, switch off the engine first.
Restoring the software version
You can restore the software to the version prior
to the last update or to its factory settings.
The software may only be restored when the ve‐
hicle is stationary.
Via iDrive:
1. "My Vehicle"
2. "iDrive settings"
3. "Software update"
4. "Restore software"
5.
▷ "Previous version"
The previous software version is restored.
▷ "Default software settings"
The first software version is restored.
6. "Remove software"
7. "OK"
8. Wait for restore.
9. "Shut down system"
If necessary, switch off the engine first.
Seite 69
Connections
AT A GLANCE
69
Online Edition for Part no. 01405A1F693 - X/20