BMW X3 - Page 71

Opening when a Check Control
message is displayed
Directly from the Check Control message on the
Control Display:
"Owner's Manual"
Changing between a function and
the Owner's Manual
To switch from a function, for instance radio, to
the Owner's Manual on the Control Display and
to alternate between the two displays:
1.
Press the button.
2. "Owner's Manual"
3. Select the desired page in the Owner's
Manual.
4.
Press the button again to return to the
last displayed function.
5.
Press the button to return to the page
of the Owner's Manual displayed last.
To alternate continuously between the last dis‐
played function and the last displayed page of
the Owner's Manual, repeat steps 4 & 5. Opens
a new display every time.
Programmable memory buttons
General information
The entry points into the Owner's Manual can be
stored on the programmable memory buttons,
refer to page 46, and called up directly.
Storing
1.
Select the desired entry point via iDrive:
▷ "Quick reference"
▷ "Search by pictures"
▷ "Keyword search"
▷ "Animations"
2.
Press the desired programmable
memory button and hold for more than 2 sec‐
onds.
Executing
Press the corresponding button.
The owner's manual is directly dis‐
played at the selected entry point.
Seite 71
Owner's Manual media
AT A GLANCE
71
Online Edition for Part no. 01405A1F693 - X/20