Safety information
Warning
Accessories on the windows such as antennas
can impact jam protection. There is a risk of in‐
jury. Do not install accessories in the area of
movement of the windows.
Closing without the jam protection
system
In case of danger from the outside or if ice might
prevent normal closing, proceed as follows:
1. Pull the switch past the resistance
point and hold it there.
The window closes with limited jam protec‐
tion. If the closing force exceeds a specific
threshold, closing is interrupted.
2.
Pull the switch past the resistance
point again within approx. 4 seconds and hold
it there.
The window closes without jam protection.
Safety switch
Principle
The safety switch can be used to prevent chil‐
dren, for instance from opening and closing the
rear windows using the switches in the rear.
If an accident of a certain severity occurs, the
safety function is switched off automatically.
Turning on/off
Press the button.
The LED lights up if the safety function
is switched on.
Roller sunblinds, rear side
windows
General information
The safety switch in the driver's door can be
used to prevent children, for instance from oper‐
ating the roller sunblinds using the switches in
the rear.
Overview
Driver's door
Button for roller sunblinds.
Rear doors
Buttons for the roller sunblinds.
Seite 113
Opening and closing
CONTROLS
113
Online Edition for Part no. 01405A385B6 - VI/21
To Next Page
Loading...
Need help?
General
