BMW X7 - Page 210

style to traffic conditions. Watch traffic closely
and actively intervene where appropriate.
Overview
Buttons in the vehicle
Intelligent Safety
Thermal image
Sensors
The system is controlled by the following sen‐
sors:
▷ Infrared camera.
The camera is automatically heated when the ex‐
ternal temperatures are low.
When the vehicle lighting is switched on, the
camera objective is cleaned at regular intervals
when the windshield washer system is activated.
Additional information:
Sensors of the vehicle, refer to page 37.
Turning on
Turning on automatically
When it is dark outside, the system is automati‐
cally active after every driving off.
Switching on the thermal image
The thermal image from the Night Vision camera
can be displayed on the Control Display in addi‐
tion to the warning function. This function has no
effect on object detection.
Press the button.
The image from the camera is displayed on the
Control Display.
Adjusting the thermal image
Brightness and contrast can be adjusted, when
the thermal image is switched on.
1.
Select brightness or contrast:
▷ "Brightness".
▷ "Contrast".
2. Set the desired value.
Warning function
Display
Icon Meaning
Pedestrian Warning.
Animal warning.
Symbol lights up red. Prewarning.
Symbol flashes red and a
signal sounds.
Acute warning.
Seite 210
CONTROLS
Safety
210
Online Edition for Part no. 01405A385B6 - VI/21