To ensure a pleasant fragrance inside of the ve‐
hicle when starting the trip, fragrancing can occur
prior to the trip. The system is automatically
switched on with the pre-ventilation if fragrancing
was switched on at the completion of the last
trip.
Functional requirements
▷ The fragrance cartridges are sufficiently filled.
▷ The interior temperature is be‐
tween 41 ℉/+5 ℃ and 104 ℉/+40 ℃.
▷ Open the air vents to allow the fragrance to
flow out.
Selecting the fragrance
The car's interior is fragranced depending on the
selected fragrance.
Two different fragrances can be selected in the
vehicle.
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Fragrance"
5. Select the desired fragrance.
Switching fragrancing on/off,
adjusting intensity
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Fragrance"
5. "Level"
6. Select the desired setting.
Highest intensity at Level 3.
Display
The illustrations on the Control Display show the
actual filling level of the fragrance cartridges.
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Fragrance"
When an empty fragrance cartridge is indicated,
the cartridge still contains a fluid carrying the fra‐
grance. However, it is not sufficient for fragranc‐
ing.
When the fragrance cartridges are empty, a
Check Control message is displayed once.
Inserting fragrance cartridges
The fragrance cartridges are located in the glove
compartment.
1.
Open the glove compartment.
Front passenger side glove compartment, re‐
fer to page 325.
2. Press on the bottom of the cartridge holder.
The cartridge holder slides down.
3. Remove the cover of the new fragrance car‐
tridge. Hold the cover on the top to slide it
from the fragrance cartridge.
Seite 310
CONTROLS
Climate control
310
Online Edition for Part no. 01405A385B6 - VI/21
To Next Page
Loading...
