BMW X7 - Page 338

Removing the cargo cover
Remove the cargo cover to the rear, arrow 1.
Stowing the cargo cover
1.
Remove the side cover on the left or right.
Side covers, refer to page 332.
2. Fold up the cargo floor panel.
3. Fold the rear part of the cargo cover forward.
4. Turn the cargo cover and stow it in the re‐
cess.
5. Close the cargo floor panel completely.
6. Close the side cover.
Screen
General information
If the vehicle is equipped with six seats, a screen
can be installed between the cargo area and the
second seat row.
Safety information
Warning
Improper use of the screen can lead to a risk of
objects flying about during braking and evasive
maneuvers, for example. There is a risk of injury
and risk of damage to property. Do not use the
screen to secure the load.
Attaching the screen
1. If necessary, fold down the rear seat back‐
rests of the third row of seats.
Enlarging the cargo area, refer to page 333.
2. Fold down the rear seat backrests of the sec‐
ond row of seats.
3. Insert cargo cover behind the second seat
row.
Cargo cover behind the second row of seats,
refer to page 336.
4. Attach the screen with the upper two hooks
to the openings on the case, arrows 1. Make
sure that the tab on the top side points to the
front.
Seite 338
CONTROLS
Cargo area
338
Online Edition for Part no. 01405A385B6 - VI/21