Mild Hybrid technology
Principle
Part of the Mild Hybrid technology is a battery
that works with a voltage of 48 volts. Mild Hybrid
technology can lower the fuel consumption.
Mild Hybrid technology influences the following
functions.
Additional information:
▷ Auto Start/Stop function, refer to page 145.
▷ Engine-Off Coasting, refer to page 352.
Safety information
DANGER
Contact with live components can lead to an
electric shock. There is a risk of injury or danger
to life. Do not touch any components that are
under voltage.
Overview
The battery for the Mild-Hybrid technology is lo‐
cated under a cover in the engine compartment
on the front passenger side.
Removing the cover
1. Turn lid up to the opened lock symbol
arrow 1.
2. Remove cover, arrow 2.
Information
A purple cable leads from the battery to the cen‐
ter of the vehicle.
Do not replace or work on the battery for the
Mild Hybrid technology.
Disposing of old batteries
Have old batteries disposed of by a deal‐
er’s service center or another qualified
service center or repair shop or take
them to a collection point.
Maintain the filled battery in an upright position
for transport and storage. Secure the battery so
that it does not tip over during transport.
Fuses
General information
The fuses are located at different places in the
vehicle.
Seite 403
Replacing components
MOBILITY
403
Online Edition for Part no. 01405A385B6 - VI/21
To Next Page
Loading...
