BMW X7 - Page 407

BMW Accident Assistance
Principle
BMW Group Accident Assistance can be con‐
tacted if assistance is needed in the event of an
accident.
General information
If the vehicle sensors detect a minor to moder‐
ately severe accident, which did not trigger any
airbags, a Check Control message appears on
the instrument cluster. In addition, a text mes‐
sage appears on the Control Display.
When BMW Accident Assistance is activated,
data on the vehicle's condition is sent to BMW.
Functional requirements
▷ Active ConnectedDrive contract, equipment
with intelligent emergency call or BMW Con‐
nectedDrive services.
▷ Cellular network reception.
▷ Standby state is switched on.
Starting BMW Accident
Assistance
If an accident is detected
automatically
A text message relating to BMW Accident Assis‐
tance appears on the Control Display.
The connection can be established directly:
"Contact accident assistance"
The Check Control message for BMW Accident
Assistance can also be called up from the stored
Check Control messages for a certain length of
time.
Additional information:
Check Control, refer to page 166.
Starting manually
BMW Accident Assistance can also be con‐
tacted independently of the automatic accident
detection function.
1. "APPS"
2. "Installed apps"
3. "BMW Assist"
4. "BMW Accident Assistance"
Follow the displays on the Control Display. A
voice connection is established.
Emergency Call
Intelligent emergency call
Principle
In case of an emergency, an emergency call can
be triggered automatically by the system or man‐
ually.
General information
Only press the SOS button in an emergency.
The Intelligent Assist system establishes a con‐
nection with the BMW Response Center.
For technical reasons, the Emergency Call can‐
not be guaranteed under unfavorable conditions.
Overview
SOS button.
Seite 407
Breakdown Assistance
MOBILITY
407
Online Edition for Part no. 01405A385B6 - VI/21