BMW XM - Page 107

Adjusting the steering wheel position
Press the switch to adjust the steering wheel
forward/back position and height to the seat
position.
Memory function
Principle
The following settings can be stored and, if
necessary, retrieved using the memory func-
tion:
▷ Seat position.
▷ Exterior mirror adjustment.
▷ Steering wheel position.
▷ Height of the Head-up display.
General information
Two memory locations with different settings
can be set for each driver profile.
The settings for the lumbar support will not be
stored.
Safety information
Warning
Using the memory function while driving can
lead to unexpected seat or steering wheel
movements. Vehicle control could be lost.
There is a risk of accident. Only retrieve the
memory function when the vehicle is station-
ary.
Warning
There is a danger of jamming when moving
the seats. There is a risk of injury or risk
of damage to property. Make sure that the
travel path of the seat is clear prior to any
adjustment.
Overview
The memory buttons are located on the front
doors.
Storing settings
1.
Set the desired position.
2. Press the button. The LED illumi-
nates.
3. Press the desired memory button 1 or 2
while the LED is illuminated. A signal
sounds.
Calling up settings
Press the desired memory button 1 or 2.
The stored position is called up.
The procedure stops when a seat setting
switch or one of the memory buttons is
pressed again.
The adjustment of the seat position on the
driver's side is interrupted after a short time
while driving.
Seite 107
Seats, mirrors and steering wheel
CONTROLS
107
Online Edition for Part no. 01405A8A608 - VI/23