BMW XM - Page 185

▷ Vehicles with unusual rear designs.
▷ Two-wheeled vehicles ahead of you.
▷ Partially covered pedestrians or bikes.
▷ Pedestrians that are not detected as such
because of their contour or posture.
▷ Pedestrians with insufficient height.
Exit warning
Principle
The exit warning helps to avoid accidents.
The system can warn the occupants when
they are opening the doors and a risk of colli-
sion with approaching objects is detected.
General information
Two radar sensors in the rear bumper monitor
the area behind the vehicle.
Depending on the vehicle equipment, the area
around the vehicle in front of the vehicle is
monitored as well. Two additional radar sen-
sors are located in the front bumpers.
The system monitors the vehicle's surround-
ings for a limited time after you get in or park.
A possible risk of collision is indicated by vari-
ous warning functions.
Safety information
Follow the safety information in the "Forward
Collision Mitigation" chapter.
Sensors
The system is controlled by the following sen-
sors:
▷ Radar sensors, side, rear.
▷ Depending on the equipment: radar sen-
sors, side, front.
Turning the exit warning on/off
Turning on the system automatically
The exit warning activates automatically after
departure if the function was switched on at
the completion of the last trip.
Turning system off manually
1.
Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Exit warning"
7. "Off"
Adjusting the exit warning
1.
Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Exit warning"
7. Select the desired setting.
Turning the warning signal on/off
1.
Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
Seite 185
Safety
CONTROLS
185
Online Edition for Part no. 01405A8A608 - VI/23