Press button P.
Parking brake
Setting the parking brake
Pull the switch.
The LED on the switch and the indica-
tor light in the instrument cluster are
illuminated.
Releasing the parking brake
With drive-ready state switched on:
Press the switch while stepping on the
brake pedal or selector lever position P
is set.
The LED and the indicator light go out.
The parking brake is released.
Parking
Make sure the parking brake is engaged.
Light and view
Turn signal, high beams, headlight
flasher
Turn signal
▷ Flashing: press the lever past the resist-
ance point.
▷ One-touch signaling: lightly tap the lever up
or down.
▷ Brief flashing: press the lever to the resist-
ance point and hold it there for as long as
you want the turn signal to flashing.
High beams, headlight flasher
Press the lever forward or pull it backward.
▷
High beams on, arrow 1.
The high beams illuminate when the low
beams are switched on.
▷ High beams off/headlight flasher, arrow 2.
Seite 25
On the road
QUICK REFERENCE
25
Online Edition for Part no. 01405A8A608 - VI/23
To Next Page
Loading...
