BMW XM - Page 288

The departure time is preselected in two steps:
▷ Set departure times.
▷ Activate departure times.
A minimum of 10 minutes should pass be-
tween setting and activating the departure
time and the planned departure time to allow a
sufficient period of time for the climate control.
Pre-conditioning will be turned off automati-
cally a few minutes after the set departure
time.
Setting the departure time
1.
Tap the icon for the Climate menu
on the menu bar.
2. "General settings"
3. "Pre-conditioning"
4. "Departure plan"
5. Set the desired departure time.
6. Select day of the week, if needed.
Activating the departure time
To turn on the pre-conditioning prior to a de-
parture time, the respective departure time
must be activated beforehand.
1.
Tap the icon for the Climate menu
on the menu bar.
2. "General settings"
3. "Pre-conditioning"
4. "Pre-conditioning for depart."
Display
Icon Description
Icon on the instrument
panel.
Icon illuminates: a depar-
ture time is activated.
Icon flashes: pre-condition-
ing is switched on.
Activating with My BMW App
Depending on vehicle equipment, the My BMW
App with remote functionality can be used to
turn on pre-conditioning at a preset departure
time or immediately.
Seite 288
CONTROLS
Climate control
288
Online Edition for Part no. 01405A8A608 - VI/23