Inserting the mobile phone
1. Open the tray cover.
2. Place the mobile phone centered in the tray
with the display facing up.
3. Close the tray cover.
LED displays
Color Meaning
Blue The mobile phone is charging.
The blue LED stays illuminated once
the inserted mobile phone with Qi
capability is fully charged.
Or-
ange
The mobile phone is not charging.
Temperature of the mobile phone
may be too high or foreign object
may be in charging tray.
Red The mobile phone is not charging.
Contact an authorized service center
or another qualified service center or
repair shop.
Forgotten warning
General information
A warning can be given if a Qi-certified mobile
phone was forgotten in the wireless charging
tray when leaving the vehicle.
The forgotten warning is displayed in the in-
strument cluster.
Enable/Disable Forgotten Warning
1.
Apps menu
2. "Vehicle"
3. "System settings"
4. "Wireless charging tray"
5. "Mobile phone reminder"
System limits
The charge current may be reduced or charg-
ing may be temporarily interrupted in the wire-
less charging tray in the following situations:
▷ Due to excessive temperatures on the sur-
face of the tray and mobile phone.
▷ If there are objects between the mobile
phone and the wireless charging tray.
▷ If storage media or electronic cards,
e.g., chip cards, cards with magnetic
stripes, or cards for signal transmission,
are located between the mobile phone and
wireless charging tray.
▷ Due to protective sleeves and covers that
exceed a thickness of 0.07 in/2 mm
▷ Due to protective sleeves and covers made
of unsuitable material, e.g., with magnetic
parts.
▷ Due to add-on parts for mobile phone, e.g.,
holders.
▷ By settings on the mobile phone, for in-
stance for charging. Follow the relevant in-
structions on the control display and in the
instructions for the mobile phone, if applica-
ble.
Seite 293
Interior equipment
CONTROLS
293
Online Edition for Part no. 01405A8A608 - VI/23
To Next Page
Loading...
