BMW XM - Page 30

ing socket flap and charging socket and the
charging cable plug as necessary, for instance
remove snow.
If necessary, unlock the charging cable before
removing.
The charging status is indicated on the indica-
tor light on the charging socket.
Keep the charging socket flap and, if neces-
sary, the charging socket lid closed when the
charging socket is not used.
Wheels and tires
Tire pressure specifications
The tire inflation pressure specifications can be
found in the tire inflation pressure table in the
printed Owner's Manual.
After correcting the tire pressure
If equipped with a Tire Pressure Monitor, the
corrected tire pressures are applied automati-
cally. Make sure that the correct tire settings
have been made. With tires that cannot be
found in the tire pressure values on the control
display, reset the Tire Pressure Monitor (TPM).
If equipped with a flat tire monitor, reinitialize
the flat tire monitor.
Checking the tire pressure
Regularly check the tire inflation pressure and
correct it as needed:
▷
At least twice a month.
▷ Before embarking on an extended trip.
Electronic oil measurement
Functional requirements
A current measured value is available after ap-
prox. 30 minutes of normal driving with the
combustion engine running.
Displaying the engine oil level
1. Apps menu
2. "Vehicle"
3. "Vehicle status"
4. "Engine oil level"
The engine oil level is displayed.
Adding engine oil
General information
Safely park the vehicle and switch off drive-
ready state before adding engine oil.
Adding engine oil
1.
Opening the hood.
2. Open the lid counterclockwise.
3. Add engine oil.
4. Close the lid.
Providing assistance
Hazard warning system
Seite 30
QUICK REFERENCE
On the road
30
Online Edition for Part no. 01405A8A608 - VI/23