To do so, pull back the cover on the under-
side.
3. Lift the cover slightly.
4. Remove the cover along the guide towards
the rear.
Inserting the cargo covers
Proceed in the reverse order to reinstall. Make
sure that the cargo covers are positioned cor-
rectly in the brackets and that they are en-
gaged.
Cover in the cargo area:
1.
Place cover on the left and right.
2. Lift the rear cover slightly and push it for-
wards.
3. Push down the cover on the rear edge until
it snaps into place on both side brackets.
Cover in the tailgate:
1.
Insert the cover along the guide into the top
brackets.
2. Push the cover on the underside forward
until it snaps into place on both side brack-
ets.
Seite 302
CONTROLS
Cargo area
302
Online Edition for Part no. 01405A8A608 - VI/23
To Next Page
Loading...
