BMW XM - Page 85

Pressing the button again continues the
opening process.
▷ By pressing or pulling the button in the
driver's door. Pressing again continues the
opening procedure.
Interruption of the closing procedure
The closing procedure is interrupted in the fol-
lowing situations:
▷ If the vehicle drives off with a jerky move-
ment.
▷ By pressing the button on the outside of
the cargo area. Pressing it again opens the
cargo area again.
▷ By pressing the button on the inside of
the cargo area. Pressing it again opens the
cargo area again.
▷ By releasing the button in the driver's door.
Pulling again and holding continues the
closing motion.
Malfunction
Warning
With manual operation of a blocked tailgate,
it can release itself unexpectedly from the
blocking. There is a risk of injury or risk of
damage to property. Do not operate the tail-
gate manually if it is blocked. Have the vehi-
cle checked by an authorized service center
or another qualified service center or repair
shop.
In the event of an electrical malfunction in the
automatic tailgate, operate the unlocked tail-
gate slowly with a smooth motion by hand.
To close the tailgate fully, press down lightly
only. Closing occurs automatically.
Key Card
Principle
The Key Card allows the vehicle to be unlocked
and locked, as well as started.
General information
Key Card availability depends on vehicle equip-
ment and national-market version.
A digital key that has already been paired with
the vehicle is installed on the Key Card. The
digital key must be activated via iDrive.
Before leaving the vehicle, deactivate the Key
Card or take the Key Card with you because
the active Key Card can be used to start the
vehicle. Always take the vehicle key with you to
a service appointment.
Safety information
NOTICE
If the Key Card and a mobile device are in the
wireless charging tray at the same time, the
Key Card could become damaged. There is a
risk of damage to property. Do not place the
Key Card in the wireless charging tray at the
same time as a mobile device.
Activating/deactivating Key Card in
the vehicle
General information
When the BMW Digital Key is activated for the
vehicle, a digital key can be used instead of the
vehicle key.
A deactivated Key Card remains in the list of
paired digital keys.
Functional requirement
A vehicle key must be located in the vehicle to
activate and deactivate the Key Card.
Seite 85
Opening and closing
CONTROLS
85
Online Edition for Part no. 01405A8A608 - VI/23