BMW XM - Page 91

Deactivating valet parking mode
1. Select the desired BMW ID on the lock
screen.
2.
▷ Enter the assigned PIN for the BMW ID.
If you have forgotten the PIN: enter the
access data for the BMW ID.
▷ If the selected BMW ID does not have
an assigned PIN: enter the access data
for the BMW ID.
Settings
General information
Depending on the equipment and national-
market version, various settings for opening
and closing are possible.
Unlocking and locking
Doors
1.
Apps menu
2. "Vehicle"
3. "Doors and windows"
4. "Lock/unlock"
5. "Unlock"
6. Select the desired setting:
▷ "Driver's door only"
Only the driver's door is unlocked.
Pressing again unlocks the entire vehi-
cle.
▷ "All doors"
The entire vehicle is unlocked.
Touchless unlocking/locking
1.
Apps menu
2. "Vehicle"
3. "Doors and windows"
4. "Comfort access"
5. Select the desired setting.
Automatic unlocking
1. Apps menu
2. "Vehicle"
3. "Doors and windows"
4. "Lock/unlock"
5. Select the desired setting:
▷ "Unlock doors at end of trip"
▷ "Unlock doors when in P"
After drive-ready state is switched off, the
locked vehicle is unlocked automatically by
pressing the start/stop button or engaging se-
lector lever position P.
Automatic locking
1.
Apps menu
2. "Vehicle"
3. "Doors and windows"
4. "Lock/unlock"
5. "Lock after a short time"
The vehicle locks automatically after a short
period of time if no door is opened after un-
locking.
Confirmation signals from the vehicle
1.
Apps menu
2. "Vehicle"
3. "Doors and windows"
4. "Lock/unlock"
5. Select the desired setting:
▷ "Flash on lock/unlock"
Unlocking is signaled by flashing twice,
locking by flashing once.
▷ With alarm system:
"Sound on lock/unlock"
Unlocking is confirmed with two sound
signals, locking is confirmed with one
sound signal.
Seite 91
Opening and closing
CONTROLS
91
Online Edition for Part no. 01405A8A608 - VI/23