BMW XM - Page 96

The window closes automatically. Pulling
again stops the motion.
Jam protection system
Principle
The jam protection prevents objects or body
parts becoming jammed between the door
frame and window while a window is being
closed.
General information
If resistance or blockage is detected while a
window is being closed, the closing will be in-
terrupted.
Safety information
Warning
Accessories on the windows such as anten-
nas can impact jam protection. There is a
risk of injury. Do not install accessories in the
area of movement of the windows.
Closing without the jam protection
system
In case of danger from the outside or if icing
might prevent normal closing, proceed as fol-
lows:
1.
Pull the switch past the resistance
point and hold it there.
The window closes with limited jam protec-
tion. If the closing force exceeds a specific
threshold, closing is interrupted.
2. Pull the switch past the resistance
point again within approx. 4 seconds and
hold it there.
The window closes without jam protection.
Safety switch
Principle
The safety switch can be used to prevent chil-
dren, for instance, from opening and closing
the rear windows using the switches in the
rear.
If an accident of a certain severity occurs, the
safety function is switched off automatically.
Overview
Safety switch
Turning the safety functions on/off
Press the button.
The LED in the button illuminates
when the safety function is switched
on.
Seite 96
CONTROLS
Opening and closing
96
Online Edition for Part no. 01405A8A608 - VI/23