Thigh support
Multifunctional seat
Push the switch in the front or back.
Lumbar support
Principle
The curvature of the seat backrest can be ad-
justed in a way that it supports the lumbar
region of the spine. The lower back and the
spine are supported for upright sitting position.
Adjusting the lumbar support
▷
Press the front/rear section of the
button:
The curvature is increased/de-
creased.
▷ Press the upper/lower section of the but-
ton:
The curvature is shifted up/down.
Backrest width
Principle
Adjusting the backrest width may improve side
support when cornering.
General information
The backrest width is changed by adjusting
the side sections of the backrest.
Adjusting the backrest width
▷ Press the front section of the but-
ton:
The backrest width decreases.
▷ Press the rear section of the button:
The backrest width increases.
Upper backrest
Principle
The upper backrest supports the back in the
shoulder region. A correct setting leads to a
relaxed seat position and reduces strain on the
shoulder muscles.
General information
When exiting the vehicle, the upper backrest
moves all the way back. The last set position is
automatically applied before you start driving.
Adjusting the upper backrest
▷ Press the front section of the button:
The upper backrest is inclined forward.
▷ Press the rear section of the button:
The upper backrest is inclined backward.
Front passenger seat functionality
Principle
The front passenger seat can be adjusted with
the switches of the driver's seat, for instance to
increase the legroom in the rear.
Seite 99
Seats, mirrors and steering wheel
CONTROLS
99
Online Edition for Part no. 01405A8A608 - VI/23