Button Function
Seat heating, refer to page 108.
Air flow, manual, refer to
page 209.
Switching on/off
Switching on
Press any button except for the following:
▷ Switching off.
▷ Rear window defroster.
▷ Lower air flow button side.
▷ Seat heating.
Switching off
Complete system:
Press the button until the control panel
switches off.
Temperature
Concept
The automatic climate control achieves the set
temperature as quickly as possible, if needed, by
using the maximum cooling or heating capacity,
and then keeps it constant.
Adjusting
Press the upper or lower button side to
set the desired temperature.
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Driver"
6. "Temperature:"
7. Set the desired temperature.
Do not rapidly switch between different tempera‐
ture settings. Otherwise, the automatic climate
control will not have sufficient time to adjust the
set temperature.
Air conditioning
Concept
The air in the car's interior will be cooled and de‐
humidified and, depending on the temperature
setting, warmed again.
The car's interior can only be cooled with the
drive-ready state switched on.
Switching on/off
Press the button.
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "A/C"
Air conditioning is switched on with the engine
running.
Depending on the weather, the windshield and
side windows may fog up briefly when drive-
ready state is switched on.
The cooling function is switched on automati‐
cally with the AUTO program.
When using the automatic climate control, con‐
densation water develops and collects under‐
neath the vehicle.
Seite 207
Climate control
CONTROLS
207
Online Edition for Part no. 01402779113 - II/19
To Next Page
Loading...
