Switching on/off directly
General information
There are different ways to switch the system on
or off.
The system switches off automatically after a
certain period of time. The system continues to
run for some time after being switched off.
Using the button
When the vehicle is in standby state, the parked-
car ventilation can be switched on or off via the
automatic climate control buttons.
Press any button except:
▷ Rear window defroster.
▷ Lower air flow button side.
▷ Seat heating.
▷ Menu.
The system switches off after leaving and lock‐
ing the vehicle.
Via iDrive
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Pre-ventilation" or "Pre-heating/ventilation"
5. "Start now"
Display
Symbol Description
Symbol on the climate con‐
trol display.
Flashing: the parked-car
ventilation is switched on.
Departure time
Concept
Different departure times can be set to ensure a
comfortable interior temperature in the vehicle at
the time of departure.
▷ One-time departure time: the time can be
set.
The system is switched on once.
▷ Departure time with weekday: time and day
of the week can be set.
On the desired weekdays, the system will be
switched on promptly before the set depar‐
ture time.
The departure time is preselected in two steps:
▷ Set departure times.
▷ Activate departure times.
Setting the departure time
Via iDrive
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Pre-ventilation" or "Pre-heating/ventilation"
5. "Departure schedule"
6. Select the desired departure time.
7. Set the departure time.
8. Select day of the week, if needed.
Activating the departure time
Functional requirement
If a departure time is to influence the switching
on of parked-car ventilation, the respective de‐
parture time must be activated first.
Via iDrive
1.
"CAR"
2. "Settings"
Seite 216
CONTROLS
Climate control
216
Online Edition for Part no. 01402779113 - II/19