Functional requirements
The function is available in the speed range from
approx. 16 mph/25 km/h to 100 mph/160 km/h.
The function is active if the following conditions
are met:
▷ Accelerator pedal not depressed.
▷ Brake pedal not depressed or only slightly
depressed.
▷ The selector lever is in selector lever position
D.
▷ Engine and transmission are at operating
temperature.
▷ Active Cruise Control with Stop&Go function,
ACC, not activated.
Operation via shift paddles
Concept
The coasting driving condition can be influenced
with the shift paddles.
Activating/deactivating coasting via
shift paddles
1.
Shift to the highest gear by pulling the right
shift paddle.
2. To activate coasting mode, actuate the right
shift paddle again.
To deactivate, actuate the left shift paddle.
Display
Display in the instrument cluster
The coasting distance traveled is indicated
in coasting mode.
Indications on the Control Display
The coasting mode is displayed under energy
flow while driving.
The distance traveled in coasting mode is dis‐
played in the trip data.
Color code blue: coasting mode.
Displaying energy flow information
Via iDrive:
1.
"CAR"
2. "Driving information"
3. "Energy flow"
System limits
The function is not available under one of the fol‐
lowing conditions.
▷ DSC OFF or TRACTION activated.
▷ Driving in the dynamic limit range and on
steep uphill or downhill grades.
▷ Battery charge status temporarily too low or
vehicle electrical system drawing excessive
current.
Driving style analysis
Concept
The function helps develop an especially effi‐
cient driving style and to conserve fuel.
For this purpose, the driving style is analyzed.
The assessment is done in various categories
and is displayed on the Control Display.
This display will help you adjust your driving style
and save some fuel.
General information
The current trip is assessed.
Seite 246
DRIVING TIPS
Saving fuel
246
Online Edition for Part no. 01402779113 - II/19
To Next Page
Loading...
