BMW Z4 - Page 62

Activating/deactivating
Via iDrive:
1. "CAR"
2. "Settings"
3. "General settings"
4. "Speed warning"
5. "Speed warning"
Setting your current speed as
the speed warning
Via iDrive:
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Speed warning"
5. "Select current speed"
Activating/deactivating
popup windows
For some functions, popup windows are dis‐
played automatically on the Control Display.
Some of these popup windows can be activated
or deactivated.
Via iDrive:
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Pop-ups"
5. Select the desired setting.
The setting is stored for the driver profile cur‐
rently used.
Activating/deactivating the
display of the current
vehicle position
Concept
If vehicle tracking has been activated, the current
vehicle position can be displayed in the BMW
Connected app or in the ConnectedDrive cus‐
tomer portal.
Activating/deactivating
Via iDrive:
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Vehicle tracking"
5. Select the desired setting.
Control Display
Brightness
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Displays"
4. "Control display"
5. "Brightness at night"
6. Turn the Controller until the desired bright‐
ness is set.
7. Press the Controller.
The setting is stored for the driver profile cur‐
rently used.
Depending on the light conditions, the bright‐
ness settings may not be clearly visible.
Seite 62
CONTROLS
General settings
62
Online Edition for Part no. 01402779113 - II/19