BOA 165B - Installation Guide; Wiring and Connection Details

8
© 2005 Directed Electronics, Inc.
pprriimmaarryy hhaarrnneessss ((HH//11)),,
88--ppiinn ccoonnnneeccttoorr
___
___
___
___
___
___
___
___
Use the following wiring guidelines for the H1 harness.
PPiinn ## WWiirree CCoolloorr NNoottee
H1/1 Blue Only required when using a bypass module.
H1/3 Brown This wire
mmuusstt
be connected.
H1/6 White/Blue
Not required unless tying into an existing
system.
H1/7
Lt. Green/
Black
Use if the vehicle is equipped with a factory
alarm.
WHITE (-) Parking Light Flash Output (optional)
LT. GREEN/BLACK Factory Alarm Disarm
WHITE/BLUE (-) Remote Start Activation Input
BLACK Ground
GRAY (-) Hood Pin Shutdown Input
BROWN (+) Brake Switch Shutdown Input
VIOLET/WHITE Tachometer Input (optional)
BLUE (-) 200mA Status Output
HH11//11
HH11//22
HH11//33
HH11//44
HH11//55
HH11//66
HH11//77
HH11//88