ATTACHMENTS
Breaker
Auger (331, 331E)
Use with a bucket to pick
up debris. Requires the
use of port relief valves in
the auxiliary valve circuit.
3 – Tined Grapple (331)
BOBCAT APPROVED ATTACHMENTS & ACCESSORIES
These and other attachments are approved for use on this model Bobcat excavator. Do not use unapproved attachments.
Attachments not manufactured by Bobcat may not be approved.
The versatile Bobcat excavator quickly turns into a multi–job machine with a variety of attachments.
See your Bobcat dealer for more details on the these and other attachments and field accessories.
Increase the versatility of your Bobcat Excavator with a variety of bucket sizes.
BUCKETS AVAILABLE
Many different bucket widths/capacities are available for a variety of applications. See your Bobcat dealer for the correct bucket for your application.
Hydraulic Clamp (331)
Must be used with
X–Change system. Use
with the hydraulic clamp to
pick up debris, rocks, etc.
Dig 6” – 36” holes with
ease and accuracy.
Break up concrete quickly
and easily.
Trenching
Bucket
Grading
Bucket
TS–01942 TS–01943
TS–01944
TS–01946
Power–Tilt
Compactor
Must be used with the
X–Change system. Use
for compacting soil after the
excavating job is finished.
Must be used with the
X–Change system. Used
for rotating the bucket to cut
at angles and for finishing
work.
TS–01945 TS–01947
Must be used with the
X–Change system.
Used for penetrating and
to scarify frost or hard
ground.
Ripper
TS–01948
Bucket Size Capacity SAE Heaped Shipping Weight
13 inch (330 mm) 2.10 cu. ft. (0.059 cu. m.) 215.5 lbs. (97,6 kg)
16 inch (406 mm) cu. ft. ( cu. m.) lbs. ( kg)
18 inch (457 mm) cu. ft. ( cu. m.) lbs. ( kg)
20 inch (508 mm) cu. ft. ( cu. m.) lbs. ( kg)
24 inch (610) mm) cu. ft (cu. m.) lbs. ( kg)
30 inch (760 mm) 6.60 cu. ft. (0.187 cu. m.) 358.0 lbs. (162,4 kg)
36 inch (914 mm) 8.24 cu. ft. (0,234 cu. m.) 388.9 lbs. (176,4 kg)
39 inch (991 mm) cu. ft. ( cu.m.) lbs. ( kg)
Bucket
Specifications
Cutter/Crusher
–84– Operation & Maintenance Manual
331/331E/334 Excavator