TS–2068A
CORRECT
TS–2067A
CORRECT
Operator must have instructions before running the machine.
Untrained operators can cause injury or death.
W–2001–1285
Safety Alert Symbol: This symbol with a warning statement, means: “Warning, be alert! Your safety is
involved!” Carefully read the message that follows.
CORRECT
B–10731
Never operate without
instructions. Read
machine signs and
Operation & Maintenance
Manual.
CORRECTWRONG
MC–1862A
Do not grasp control
handles when entering
canopy or cab.
Be sure controls are in
neutral before starting.
Sound horn and check
behind machine before
starting.
MC–1859A
Never operate without
approved canopy or cab.
Never modify equipment.
Never use attachments
not approved by Bobcat
Company.
WRONG
MC–1865A
Avoid steep areas or
banks that could break
away.
Use caution to avoid
tipping–do not swing
heavy load over side of
track.
Operate on flat, level
ground.
CORRECTWRONG
TS–2075
Keep bystanders out of
maximum reach area.
Do not travel or turn with
bucket extended.
Never carry riders.
MC–1865B
Never exceed a 15° slope
to the side.
Never travel up a slope
that exceeds 15°.
Never exceed 25° when
going down or backing
up a slope.
CORRECT
MC–1859A
To leave Excavator,
lower the attachment.
Stop the engine.
Fasten seat belt
securely.
Operate controls only
from operator’s seat.
CORRECT
SAFETY EQUIPMENT
1. Seat Belt
2. Swing Lock
3. ROPS/TOPS Canopy or
4. Machine Safety Signs
5. Safety Tread
6. Grab Handles
OSW20–0500
OPERATOR SAFETY WARNINGS
TS–2074
WRONG
Cab
15° Maximum
15° Maximum
25° Maximum
To Next Page
Loading...