Fluids such as engine oil, hydraulic fluid, coolants, etc.
must be disposed of in an environmentally safe manner.
Some regulations require that certain spills and leaks on
the ground must be cleaned in a specific manner. See
local, state and federal regulations for correct disposal.
Instructions are necessary before operating or
servicing machine. Read Operation &
Maintenance Manual, and signs (decals) on
machine. Follow warnings and instructions in
the manuals when making repairs,
adjustments or servicing. Check for correct
function after adjustments, repairs or service.
Failure to follow instructions can cause injury
or death.
W–2144–1089
331/331E/334 Excavator
Operation & Maintenance Manual
15
DAILY INSPECTION
Check the following items before each day of operation:
Maintenance work must be done at regular intervals.
Failure to do so will result in excessive wear and early
failures. The Service Schedule [A] is a guide for correct
maintenance of the Bobcat Excavator. It is located inside
the rear door of the excavator and also in the MACHINE
SIGN TRANSLATION SECTION Page 63.
• Operator Canopy or Cab (ROPS/TOPS) and mounting
hardware.
• Seat belt and mounting hardware.
• Damaged decals, replace as needed.
• Check control console lockout.
• Air cleaner and intake hoses.
• Engine oil level and for engine leaks.
• Hydraulic fluid level and system for leaks.
• Grease all pivot points.
• Cylinder and attachment pivot points.
• Track Tension.
• Repair broken and loose parts.
A
6815092
To Next Page
Loading...