Bobcat 743 - Before You Start the Engine

o
OPERATING INSTRUCTIONS
DO NOT operate the Bobcat loader until
you have read this operator's manual
completely.
I nstructions for operating the Bobcat
loader with safety and efficiency are
given on the following pages.
Carefully follow these instructions to
take advantage of the Bobcat loader's
design.
You must remember operator safety at
all times while you operate the loader.
Read the safety instructions inside the
front cover of the operator's manual.
It is important that you use the
following procedures when you
operate the loader.
1. Use the safety treads and grab
handles when you get on or off the
loader (Fig. 1).
AWARNING
Remember to stop the engine,
engage the parking brake and
lower the lift arms before you
get off the loader.
2. Adjust the seat position for easy
operation of the loader (Fig. 2).
Adjust and fasten the seat belt
(Fig. 3) and lower the seat bar
(Figs.
4, 5 and 6). Check that the
parking brake is engaged before
you start the engine.
B-3943
Fig.' Using Safety Treads & Grab Handles
C-2637
Fig. 3 Fasten Seat Belt
C-2623
Fig. 5 Lower Seat Bar
-,-
Fig. 2 Seat Adjustment
Fig. 4 Lower Seat Bar
Fig. 6 Seat Bar Lowered
B-3878
C-2622
C-2621
C-2624
743 Loader
Operator's Manual