AVOID INJURY OR DEATH
• Before lifting, check fasteners on single point lift
and operator cab.
• Assemble front cab fasteners as shown in this
manual.
• Never allow riders in the cab or bystanders within
5 m (15 ft) while lifting the machine.
W-2007-0910
The loader can be lifted with the Single Point Lift which is
available as a kit from your Bobcat loader dealer.
The Single Point Lift, supplied by Bobcat, is designed to
lift and support the Bobcat loader without affecting roll
over and falling object protection features of the operator
cab.
Figure 145
Attach lift to lift eye [Figure 145].
NOTE: Be sure the lifting equipment is of adequate
size and capacity for the weight of the loader.
(See Performance on Page 170.)
Four Point Lift
AVOID INJURY OR DEATH
• Before lifting, check fasteners on four point lift.
• Never allow riders in the cab or bystanders within
5 m (15 ft) while lifting the machine.
W-2160-0910
The loader can be lifted with the Four Point Lift which is
available as a kit from your Bobcat loader dealer.
Figure 146
Attach cables or chains to lift eyes [Figure 146].
NOTE: Be sure the lifting equipment is of adequate
size and capacity for the weight of the loader.
(See Performance on Page 170.)
To Next Page
Loading...